STEP 1:
Install the panels with the channels in the same direction as the slope to allow for proper drainage. A Minimum 10% slope is required for drainage.

STEP 2:
To join the panels sideways, use a HCP connector with the joint in the center of the profile. Avoid perforating the panels, maintain the tightness of the channel to avoid leaks.

STEP 3:
To extend the panels lengthwise, overlap 5 inches the top panel with the bottom panel.

STEP 4:
PolyBamboo seals are not hermetic. For outdoor use, seal the top and bottom end with aluminum tape and polycarbonate u-lock channels.